|
| |
ˇ@RF Optical Mouse |
|
|
|
|
|
|
|
|
|
|
ˇ@Rechargeable RF Optical Mouse |
|
| |
ˇ@RF Wireless PC Game Pad |
|
| |
ˇ@RF Wireless Keyboard |
|
| |
| |
| |
| |
ˇ@RF Optical Mouse |
ˇ@Q: What the cursor motion of optical mouse is too fast to be controlled? |
|
ˇ@
ˇ@ A: This product comes with a factory setting at 800cpi as default value, however if the user feels that the cursor motion is too fast resulting in a difficult control over its position when clicking for a selection
|
| Receiver |
Process of 400cpi setting up |
| Press the "Setup" key once, the LED lamp goes off. |
• Press the scroll and the set up key of mouse together
• Release the scroll and the setup key
• Move the mouse right and left on the table
• (If mini mouse, move up and down )
• At this time as the LED of receiver lights, the mouse is available. |
| Receiver |
Process of 800cpi setting up |
| Press the "Setup" key once, the LED lamp goes off. |
• Press the set up key of the mouse
• Release the ˇ§setupˇ¨ key
• Move the mouse right and left on the table
(If mini mouse, move up and down )
At this time as the LED of receiver lights, the mouse is available. |
|
ˇ@When replace the batteries for each time , the figure will be back to 800cpi as preset.
 |
ˇ@Q: Why RF Optical Mouse can't work ? |
|
ˇ@ A: Please follow the setting up process as user's manual showed
ˇ@(b)Please check batteries have been inserted to right polarity
|
| ˇ@Q: How to deal with the response time of the mouse is slower ,the mouse intermittently stops working? |
ˇ@ A : Please try the following process :
ˇ@(a) Increase the distance between the mouse's receiver and the rest of your computer equipment.
ˇ@(b) Please don't use the mouse on the tables surface such as metal, iron, aluminum which may slow down the ˇ@
ˇ@(b) mouse response time or cause the mouse to fail temporarily.
ˇ@(c) Please adjust the distance or relocate the mouse and the receiver
ˇ@(d) Please replace with new batteries.
|
ˇ@Q: What color of table is the most suitable for RF Optical mouse working on? |
ˇ@ A: It is recommended to use a light colored and plain desk surface to ensure correct recognition of the cursor position movement, and to reduce the power consumption. Desk wooden patterns will caus e a trembling the dark colored desk surfaces has an important light absorbency which will increase energy consumption by the optic IC. Glass desk surfaces like should be avoided as they are unable to reflect the signal. A white paper sheet put on the desk surface is the best way for the optical mouse.
|
ˇ@Q: Why the LED of wireless optical mouse turning off automatically ? How to wake it up |
ˇ@ A: In order to extend the lifespan of the batteries, our RF optical mouse has incorporated an energy saving mechanism into its design, with which the optical LED lamp goes out completely after a certain interval if the mouse remains in a stand by condition.
The mouse resumes its function when it is awoken by gently shaking it, the LED lamp then lights up immediately. If )the mini model mouse is being used, the shaking movement up and down or pressing the left or right button to awake it. Battery lifespan is expected to be doubled thanks to this energy saving mechanism, depending on usage conditions, it might cause a minor inconvenience when using the mini model mouse, but it can reduce battery expenses.
|
ˇ@Q: Is it true that if I don't complete a full charge of the batteries, I might damage
them or shorten their total life? |
ˇ@ A: No , you won't damage the batteries or the mouse with a partial recharge. However, the less time the mouse spends charging in the Rapid Charge Base Station means the less time you can use it before it needs to be recharged again.
|
ˇ@Q: I changed my batteries and now my pointer doesn't move or my keyboard doesn't work. What happened? |
ˇ@ A: First, verify you have inserted the batteries with the correct polarity. Second, and most common, the mouse/keyboard and receiver may need to be re-synchronized. Just press the button on the receiver then press the ˇ§SET UPˇ¨ button on the bottom of the mouse/keyboard.
|
ˇ@Q: Can I use other types of rechargable batteries to power and charge the mouse? |
|
ˇ@ A: Yes, but only just to power the mouse, not charge it. Attempting to other type of battery will damage your mouse. Warning: Do not try recharge any other type but the NiMH batteries. Both alkaline batteries and rechargeable batteries are recommended for use with this product, however the two types of batteries should not be mixed up and used at the same time (i.e. combining an alkaline battery with a rechargeable battery) in order to avoid risks of explosion. The usage of rechargeable batteries results in a reduced expense and is less harmful to the environment.
ˇ@
|
ˇ@Q: Why there is no driver packed with the wireless optical mouse? |
|
ˇ@ A: This product meet the standards of Windows and Mac systems, the CD driver is not necessary to be installed for
mouse.You may download the mouse driver on our website: www.globlink.com.tw
Installing the driver software will give you extra convenient features as the following:
ˇ@(a) A radar icon will be added to the Windows task bar, when the radar icon is green it indicates that the battery is ˇ@ full, otherwise it becomes red to indicate low battery .
|
| |
ˇ@Nevertheless the above explained, the low battery display can only detect the capacity of alkaline batteries, and it is not accurate when detecting rechargeable batteries because of the different voltage characteristics.If you are using rechargeable batteries, you may experience that newly recharged batteries are detected as having insufficient capacity; you can ignore the alert and only replace the batteries until the mouse stops working.
ˇ@(b) Clicking twice the left button on the radar icon will enter into the mouse control interface,
|
|
ˇ@Q: Why there is no driver packed with the wireless optical mouse? |
ˇ@A: To avoid interference in the environment and extension for desktop PC users. ˇ@ |
|
ˇ@Rechargeable RF Optical Mouse |
ˇ@Q: How to use Y cable to recharge for RF optical mouse? |
ˇ@A: Please follow the below instruction to let your mouse work again.
ˇ@1.) Connect the Y cable to PC USB port and wireless optical mouse.
ˇ@2.) Insert the batteries.
ˇ@3.) Set up the mouse ID
|
|
ˇ@RF Wireless PC Game Pad |
ˇ@Q: Please list down the exact games name in which your PC game pad supports |
ˇ@A: No exact game names because the users could program by themselves PC game would play with keyboard, mouse or game pad. But some of the games only support keyboard or mouse only. No-matter the game it is, if it support the game pad(any brand name). Customer can check whether at the control consol of Windows. They can find out the game pad when customer move the paddle or pressing the key. It means that our game pad are already installed. It all depends on the game which can compatible or valid to use the game pad.
|
|
|
ˇ@RF Wireless Keyboard |
ˇ@Q: Does RF keyboard or mouse support ACPI power management, can I use this keyboard or mouse to bring  a PC out of standby which has gone to standby mode? |
ˇ@A: USB only support DC power with 500uA, when it is suspend.The receiver need over 30mA.Then it can't be waken up during suspend.For information , we don't put ACPI keys on the RF wireless keyboard .
|
| |
